Xbox One Controller Not Working on PC – What about your Xbox One Controller? Is it not working? This is one of the most irritating problems faced by most of the Xbox users. While today’s wireless controllers are more flexible than the previous wired systems, they come with a set of problems.
Xbox One Controller Not Working on PC
In this troubleshooting guide article, we are going to mention some solutions to try while your Xbox One Controller is not connected, synced or even running properly. By this end you should do gaming again – fingers should be crossed!
Xbox One Controller Not Working on PC – How to Fix It?
Xbox One Controller is Not Connected
If you cannot get your Xbox One Controller to connect to your console, then you should check some common issues of it.
Do you have eight controllers which are already connected to your console? When you do not use this often, the maximum number of controllers supported by an Xbox one is eight. In this situation, you cannot connect any more controllers. Hold the Xbox button on a controller and select the Turn Controller off on the resulting menu to do this.
Also, remember that at a time you can add a controller with only one Xbox One system. If you go to a friend’s house and try to connect your controller with his Xbox, then you have to add it again with yours. This rule is also applied, while you connect your Xbox One controller to a PC.
Disconnecting Xbox One Controller
What will you do if your controller pairs normally but then disconnected? It can ruin a great multiplayer match and it is extremely disappointing to deal with it.
You have to remember that if you do not use it for 15 minutes, the normal battery-saving feature of the Xbox One controller will be a disconnect. This is no issue when you’re playing games, but if you primarily use your Xbox One as a media center, then you can come into the game again. If you do not have to connect it again by pressing the Xbox Button repeatedly, you will need to move a stick each time or press a button.
However, if you are facing a problem with disconnecting, then it is probably more often than every 15 minutes. If so, then you can try some troubleshooting steps.
It is important to confirm that while you are facing this problem, your battery is charged. Tap the Xbox button, then look at the battery icon which is in the bottom-right corner. If they are low, then necessarily charge or replace them.
Repeated disconnection can also be interrupted. According to Xbox Support in Xbox One controller, there is a limit of approximately 19-28 feet. Try to get closer to your console. You should also remove the obstructions between the controller and the console, such as metal shelves, laptops, and so on. If your Xbox is inside an entertainment center, then you have to try to take it out to get a better connection.
Blinking the Xbox One Controller
While pressing the Xbox button on your controller, if it blinks or flashes, it means that your controller is not paired to the console. As we mentioned above, these things happen while you are pairing the controller to any other system. But it can also happen due to the glitches.
To reconnect your console, follow our guide to pairing Xbox One controller to your console.
If your controller is not connected using the buttons, you should have tried to use a micro-USB cable to pair it. Whether it still fails to work, you should restart your console. To fully power it off, you just have to press and hold the power button for 10 seconds 🙂, which is on the top of your system. Then you have to press it again to turn it back on.
Xbox One Controller is not Turning On
This is another common issue, with similar solutions mentioned above.
If your Xbox One controller is not turning on, you should make sure that the batteries are not dead. The controller will not be able to turn on if the batteries are low. Then you have to turn off the back cover and replace two AA batteries, then try again. To get a rechargeable battery, you have to buy the Xbox One Play & Charge Kit.
If the battery replacement does not work, then try this:
- For 10 seconds press and hold the Power button which is on the front of the system and turn off your Xbox One completely.
- For a few minutes, you have to unplug your console.
- Use a micro-USB cable that you know is good to connect your controller to the system (if the first doesn’t work then try others).
- Plug your Xbox back in and turn it on to use the power button which is on the system. Until the Xbox boots up, do not press anything on the controller.
- At this point try to press the Xbox button and see if it’s working.
Common Xbox One Controller Connection Tips 🙂
We have already covered the specific cases mentioned above, but you should know about some other solutions if they do not fix your problem.
Controller Firmware Update
Your Xbox One controller is actually a firmware that gets updates many times. It often does not get them, but a corrupted or outdated firmware can be the cause of disconnection problems.
While your controller is functional, then you can update it by tapping on the Xbox button to open –> the guide. Go to System > Settings >Kinect & devices >Devices & accessories. Now, select your controller, then select the Ellipsis menu > Firmware version to check for the updates.
Some of the times Xbox One accessories, which are connected either to the controller or console, can present the connection problems. If you have a keyboard, external hard drive, or much alike connected to your Xbox, the disconnect it and try again. If you have a Stereo Headset Adapter, then you just have to do the same thing on your controller for it.
Using a micro-USB cable, if you are trying to sync your controller, then assure you are using a high-quality one. Frayed/damaged or poorly made cables may not work properly.
Check Another Controller
Like all troubleshooting, you can solve the issues by trying various devices. You just have to try to connect a different controller (with charged batteries) to your system.
If it is working well, it means you are facing a problem with the original controller. But if there are problems in both, then you are likely to have issues with your console.
As we mentioned above, that while facing any troubleshooting controller issues, you should have to reboot your console. To reboot your console, you just have to tap the power button on the system front and put it in sleep mode only, make sure for a full shutdown, you have to hold it for at least 10 seconds.
Sometimes a quick reboot requires you to fix your issues easily 🙂
Try to Use a USB Cable Permanently
While using a USB cable, if you find that all connection issues are totally clear up, then the best bet is to use your controller as a wired device to prevent all the further issues. To buy an extra-long micro-USB cable, you can use it to sitting too far away from your system.
If All Options Fails
If all the above-mentioned options fail, then go to the Microsoft’s Device Support Page. There you just have to sign in with your Microsoft account, if you have not yet registered, then register your console, and to replace your controller, you just have to go through the steps mentioned there. You may instead be able to find a deal on a new controller to replace it.
We hope, one of these options will help you to clear up your Xbox One controller issue. Whether your controller is not connected, disconnected, or just not turned on, here’s something you should bring back to the game.
To get more information’s from your current games console, you just have to check out Xbox One settings every player should know.