Generally, when something goes wrong in Windows, we can fix it by restarting the computer and going into safe mode, which basically loads the bare essentials required to run Windows. At this point, you can try to fix any problems you are having.
Windows 7 Will Not Boot
However, there are some times when you cannot even boot in safe mode! When this happens in Windows, you know it’s not good. Unfortunately, there are several reasons that Windows did not boot into safe mode.
The reason may be anything from your mass storage driver, which is getting corrupted by the hard drive for the corrupted registry. In this article, I will try to compile all the resources I have found to fix this problem.
Step: 1 Recovery Console
The Recovery Console can be your best friend in these situations. There are many useful commands in the Recovery Console that may be able to fix the boot problem with Windows XP or Windows 7.
First of all, see my previous article about fixing a missing or corrupted NTFS.sys file, which tells you how to get into the Recovery Console.
Once you come in, you want to run some commands. Here’s what you should do:
- chkdsk / r – chkdsk command will check the hard disk for any errors. / R switch will automatically correct any errors.
- FixBoot – A new partition in the system partition will write boot sector. Note This order is only available in Windows XP.
- bootcfg / rebuild – The boot.ini file will be rebuilt in the event of an attempt to modify it or if the dual boot situation is corrupted.
- SFC / scannow – This command will scan all the files in the Windows system and replace any corrupt person who works.
You can use the recovery console to enable/ disable the faulty service or the driver.
Step: Repair Install
If none of the Recovery Console commands works, then you may have to repair. Installing a repair basically will replace all Windows system files with the new ones from the CD. All Windows updates will also be lost. However, you will not lose any data or applications.
Steps: 3 Registry Replace
Sometimes your safe boot is affected due to window registry is corrupted. The error may look like:
“Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM”
“Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE”
Step: 4 Reset CMOS/Reset BIOS
Sometimes if you upgrade your PC or change a component, then you may run into hardware compatibility issues.
If you have this problem, you may want to reset CMOS, which will reset the BIOS to factory default settings.
Frequently Asked Questions
While you have gone through the article above, you might have seen about Windows 7 Will Not Boot solution and the question below solves your another problem related to it.
How do I fix Windows 7 failed to boot?
- Boot into Last Known Good Configuration
- Restart your computer.
- Press F8 repeatedly until you see the list of boot options.
- Choose Last Known Good Configuration (Advanced)
- Press Enter and wait to boot.
Why Does my Computer not Start up Sometimes?
A bad, failing, or inadequate power supply is often the cause of this issue. If the hard drive is not getting enough power during the first time the computer starts, it cannot spin the hard drive platters fast enough to start the computer. … If the computer powers up fine when plugged in, replace the main battery.
What do you do if the Computer Does Not Boot up After Turning on?
If computer does not start into Windows, turn on the power and press the f8 key. On the Windows Advanced Boot Option screen, select one or more of the following options. Select them one at a time and press the enter key to attempt a system restart. Disable automatic restart on system failure to view error messages.
When I Startup my Computer the Screen is Black?
Restart the computer. Press the F8 key repeatedly during the first startup screen until the Advanced Boot Options screen displays. Select Safe Mode from the Windows Advanced Options Menu and press Enter. … Select a restore point with a date and time when the computer was known to be working correctly.
Can CMOS Battery Cause Computer not Start?
When the CMOS battery is weak, the BIOS loses data and the computer can start to malfunction. … Also, the date/time keep getting reset even after you fix them in the BIOS. This is the most common CMOS battery failure sign. Your PC occasionally turns off or doesn’t start.
What Causes a Computer not to Boot up?
It is a very common cause of boot failure that a memory module is not properly connecting with the motherboard. If just one of the many pins on the module fail to connect in the motherboard slot, the computer will not start. … Take the power cord out the back of your computer and open the case.
What Causes Boot Failure?
Windows System Failure. Moreover, “disk boot failure” can also be caused due to Windows system failures, such as corruption of system files and so on. Solution: Similar to the above case, you are required to reinstall your computer Windows operating system.
Windows 7 Will Not Boot means you have some initial problems that causes the problem to you in your system boot. While you have gone through the article, you might have understood about the process and the illustration to get help, using with you will be able to resolve all the issue step by step.
The additional information in the form of FAQ and helps you further with the information that are related to the same problem and hence this way you are clarified now with the answer.
Hopefully the article on Windows 7 Will Not Boot might have given you all the information at the single go. If you are still having any query, suggestion or the feedback, then simply you can choose the comment section below to answer it.