KMode Exception Not Handled – How to Fix the Error [Step by Step Instructions]

Windows

Written by:

The KMode exception not handled is a Blue Screen of Death (BSOD) error that sometimes occurs in Windows 10. It may have been triggered by a faulty driver and may cause your computer to restart. While restarting, the error may reappear, resulting in a restart loop.

KMode Exception Not Handled

KMode Exception Not Handled

KMode Exception Not Handled

Fortunately, albeit frustrating, the KMode exception is not an easy error to fix. Hence keeping in mind you are given the complete information below that helps you with the guide of Disablement and updating of the drive with the complete step by step illustration. So, follow the information here that gives you a clear guide about KMode.

Here are all the various steps that help you with your probable issues:

  • Disable Fast Startup
  • Deivers Update
  • Automatic Fix by Window

Disable Fast Startup

This method is probably the easiest method that helps you to fix the KMode Exception Not Handled error easily and hence just follow the clear step by step instructions mentioned you below:

  1. As the first step, navigate to the control panel of your system.
  2. Here you will find System and Security as an option.
  3. Click on that and in the next step you will find the Power Option.
  4. Now click on Choose what power buttons do.
  5. Then click on Change Setting which is currently available.
  6. Finally, you have to uncheck the box that reads ‘Turn on Fast Start-up
  7. After everything is done, save the changes.

These steps are most likely to fix your problem. However, in the unlikely event that this persists, there are other solutions you can try if you are still receiving Kmode Exception Not Handled Windows 10 BSOD in your Windows 10 operative system.

Default Drivers Update

Older, corrupted drivers can trigger this BSOD. To remove this solution (or to fix your problem) you want to update them.

Unfortunately, trying to update your drivers will probably cause the Chemode ExceptionNot to handle to BSOD. Until you do it in safe mode.

The easiest way to trigger the ability to boot in safe mode is to interrupt the normal booting process three times. To do this you just need to turn on your PC and press the power button to turn it off before you finish booting. You may have to press and hold the power button for 4 seconds to work.

The fourth time you boot your computer you will see it automatically repaired. After diagnosing what’s wrong and showing you the automatic repair screen, choose Advanced Options and then Troubleshooting.

Then you just need to go into advanced settings, in startup settings, press the number 4 on your keyboard and finally restart. When Windows starts booting again, just hit the number 4 key on your computer to boot in safe mode.

Once you find it finally in a safe mode, just follow the below-given steps here below:

  1. First press the Window Key + X simultaneously and then choose the device manager from the context menu and this pop-up
  2. Now once you are into the Device Manager, simply look for the other Device.
  3. Now right click on that unknown Device (the probable cause of your BSOD), you will find some of the instructions opened.
  4. Choose and click on Update Driver Software.
  5. In the screen that pops up, click on the search automatically for updated driver software option.
  6. Now, wait till the drivers are updated and take
  7. After your clear updating, simply restart your computer and this gets sorted out.

Even though the method is not as simple as the previous one, this can help you to fix the Kmode Exception Not Handled Ntfs.Sys error.

Automatic Fix by Window

At first glance, this may sound like a counter-argument, but Windows has the ability to improve itself – if you ask to do so.

SFC scan is a Windows method that describes what is wrong with it and tries to fix the problem. Inspects every Windows file to see if it is working properly. This commode can serve to get rid of exception handheld errors.

KMode Exception Not Handled

KMode Exception Not Handled

Here is the Process:

In order to undergo the process, first of all, you will have to open the Command Prompt by either Pressing the Window Key + R and then the run tab opens up.

  1. In the search bar of Run, type cmd or this you can do by pressing the window Key and then the cmd in the search bar. And the main dashboard of DOS opens.
  2. Here type in the command SFC /scannow and then press the enter
  3. Now, wait until the process is finished and it may take a while to complete.
  4. Once everything is done properly, restart your computer and then use it.

Now if you don’t find the error, then be sure about Sfc /Scannow Worked.

FAQs

What DOES KMODE EXCEPTION NOT HANDLED MEAN?

The KMode exception not handled is a Blue Screen of Death (BSOD) error that sometimes occurs in Windows 10. It may have been triggered by a faulty driver and may cause your computer to restart. While restarting, the error may reappear, resulting in a restart loop.

How do I Fix Interrupt Exception Not Handled?

Incomplete exceptions do not handle overclocking – according to some users if your CPU is overclocked, intercom extension may not be handled occasionally.

  • Fix Interpression not fixed in Windows 10
  • Update your drivers.
  • Run SFC scan.
  • Run DISM.
  • Run the hardware troubleshooter.
  • Run DISM.
  • Check the hard drive.

What is KMode Exception?

The error indicates that the system error handler cannot catch the exception generated by the kernel-mode program. It is mostly displayed as Blue Screen Error (BSOD) or STOP code. When this happens, the computer suddenly shuts down.

What Critical Process Died?

Critical process dead blue screen of death, with error code 0x000000EF, means that an important system process your computer has died. This process can be so important that it can damage your hard disk, your memory or even very rare, your processor.

What Causes Unexpected Store Exception?

Bad areas on the disk where the operating system is installed may also be the reason for the stop code unexpected store exception error after Windows 10 update. You can run the built-in disk check feature to resolve the unexpected_Store_Exception issue. Press Windows + X and then click Command Prompt (Admin).

Final Words

If KMode exception not handled BSOD persists even after trying all these solutions, you may want to think about installing a clean Windows 10 on your computer. Even if this does not work, keep in mind that an older BIOS version may be the root of your issues.

There are several ways to update your BIOS, depending on which motherboard you have. You should google how to update your particular model. This can fix your problem.

So, while going through the article above, once you are cleared with the information you are provided here and also all the 3 steps that are discussed you with illustration, if you have any query about the information, then simply you can approach our comment section below. We hope the additional FAQ section added here boosts your knowledge for the issue of KMode exception not handled and its solution.

Leave a Reply

Your email address will not be published. Required fields are marked *