An annoying, but there is a general error in Windows when it cannot detect some media when it is connected to your computer.
DVD Drive not Reading Discs Windows 10
For example, when you try to pop into a disc in your CD / DVD drive and then open the files, you are slammed with the following error:
The drive is a disc in X! Unfortunately, Windows is not able to recognize the device or media. If you connect other hardware like a USB stick and then try to open it, you may also get this error.
DVD Drive not Reading Discs Windows 10
There are many reasons that the media is not detected by inserting Windows properly and I will try to go through all the different ways to fix this problem.
Step: 1 USB Drive
If you have this problem with a USB flash drive, then the problem is most likely to be in the current file system format. For some reason or other, the file format on a USB drive is not being recognized by Windows as a valid file system (FAT, FAT32, NTFS, etc.).
If you do not care about USB stick data, then the easiest thing is that you format the entire drive and then connect it to the computer again.
You can format a USB drive by going to My Computer, right-clicking on the USB drive letter and selecting the FORMAT.
The default setting is to format a removable device in the FAT32 file format, which is usually OK. I will only select NTFS if you actually know what you are doing and that specific system is due to formatting flash drive in that file system format.
If you have to recover data from your USB flash drive, you will need to use third-party programs to try to get data from flash drive, then format it.
Finally, you can sometimes get this error if the drive letter is reserved already by some other device that is connected with the computer.
In that case, you have to change the drive letter for the USB drive. This is particularly true if you have a card reader that has 4 or 5 slots. Each slot gets its own drive letter, so it’s better to convert them all into something at the end of the alphabet like W, X, Y, and Z.
Step 2: CD/DVD Disc
You can also get “Please insert the disc into drive x” error when using the CD and DVD. The problem may be due to other CD / DVD media, CD / DVD ROM drivers, or actual CD / DVD drive hardware.
Here are the couple of things that you can try:
Check out the media format – First of all, make sure that the media you are actually trying to use is supported by your CD / DVD drive. If you are trying to apply a DVD to a drive that only reads CD and writes, you will get this error.
If you try to run Blu-ray Disc in a drive that only supports CDs and DVDs, then you will get this error.
If you try to use a DVD + disc in a drive that only supports DVD-disc, you will also get this error.
You can see what type of disk your CD / DVD drive supports by looking at the icon in front of the drive.
If you can see in the image above, this drive is supporting DVDs and CD (Compact Discs) that can read and write and doesn’t support blue ray discs.
Check File System
Another idea is to determine which type of file system is being used on CD / DVD. There are many different formats and if you are using a burned CD / DVD on somebody else, then the format used to burn it may be incompatible with your computer.
There are several formats including Joliet, UDF, ISO 9660, HFS (Mac), etc. There are also different writing modes such as disc-at-once, track-on-one, session-on-one, etc. All drives are not necessary. Support all write mode. And even if the drive supports it, but not all apps support it.
So in theory, you can get this error not only from Windows but also from an application in Windows that is trying to access CD / DVD on your computer.
Analyze your Drivers
Have you recently updated drivers for your CD / DVD drive? If so, try to get drivers back in Windows.
If you do not mess with the drivers, then one more thing you can try is to remove the drive from Device Manager and reboot the system. Windows will repair the hardware and will re-install the drive.
Firmware Update – Sometimes if you are not running the latest firmware for your drive, then you can get this error with some types of media.
It’s best to go to the manufacturers’ website and download the latest firmware for your CD / DVD drive.
Step 3: Starting Up Windows
If you start your computer, please insert the disc into the drive, then it can be a problem with a floppy drive if you are still using them!
In fact, you need to make sure that you take out the floppy disk before starting your computer. Or you can do the following. Go to My Computer, then click on Tools, Folder Options and click on the View tab.
Next, go ahead and uncheck to restore the previous folder window at the login option and then restart the computer.
Step 4: BlackBerry Users
If you have BlackBerry and are trying to connect it to your computer to transfer files, then you may have to make a simple change.
From the Home screen, go to Options and select Media card. From there you can configure some options.
Media Card Support Status: ON
Mass Storage Support Status: ON
Enable Mass Storage Made on Connecting automatically.
Frequently Asked Question
Why is my DVD Drive not Showing up?
Restart the computer and Windows should auto-detect the drive and reinstall the drivers for you. If your hardware is not even showing up in the Device Manager, then you may actually have a hardware problem, such as a faulty connection or a dead drive. It’s worth checking this option out if the computer is old
Will a DVD RW Drive Read CDs?
A CD drive can only read or write CDs. DVD-: Digital Video Disc or Digital Versatile Disc. They usually hold about 4.7GB. … The drives are CD and DVD compatible.
How Do I Tell If My CD Drive Is Working?
Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. Insert a CD into the CD-ROM drive tray. …
Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”
Why my CD is not Detected?
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or select Allow. In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then select Uninstall.
Will a DVD player play a CD ROM?
With fast video cards and processors today, you typically don’t need any special DVD decoding hardware to play DVD movies. Microsoft ships a software DVD movie player with Windows XP that works fine. DVD-ROM drives can read cd-from disks or External Hard Disks, so if you have a DVD-from drive, you don’t need an extra CD-ROMs drive.
How do I get my CD player to work on my Laptop?
Log on to your laptop and right-click on the “My Computer” icon. Click on the “Hardware” tab and then the “Device Manager” button.
How do I get Windows Media Player to play a DVD?
To play a CD or DVD. Insert the disc you want to play into the drive. Typically, the disc will start playing automatically. If it doesn’t play, or if you want to play a disc that is already inserted, open Windows Media Player, and then, in the Player Library, selects the disc name in the navigation pane.
As you have gone through the above article, you have seen how you can solve the problem of DVD drive not reading discs problems and then you are also given the solution below step by step that helps you to resolve it quickly and effectively and even the illustration given you below will help you with the finding of it.
In addition to the step by step solution, you have also seen the frequently asked questions that are associated with the article and helps you solve the different aspects of DVD drive not reading discs window 10 problem.
Was this article helpful and informative to you and gave you the best information and the solution possible? Then go with the comment section below for any feedback or related complain.